The Cat - Pocket Operator Case

A 3D printed pink case for the Teenage Engineering Pocket Operator. 

An acrylic glass pane is incorporated into the LCD opening on the top. This provides additional protection for the Pocket Operator's display.

Note: To insert the pocket operator into the housing, the PO hanger must be completely removed. Residue may need to be carefully sanded off to ensure the top of the Pocket Operator is smooth and straight. Never force the Pocket Operator into the case!

If you don't want to remove the Hanger of the Pocket Operator, you will also find cases in the shop where the Pocket Operator's pendant can be passed through an opening on the back of the case.

Default color configuration (as shown in the photos)
- 16 sequencer buttons: white softbuttons printed with FilaFlex40
- 6 side buttons: 7 white soft buttons printed with FilaFlex40
- 1 play button: 1 white soft button printed with FilaFlex40
- Case color: pink

The CAT - pink case for the Pocket Operator contains:
- Top of case
- Lower part of the case
- 4 screws
- 23 keys
- 4 silicone feet encoder caps

The pocket operator shown in the photos is not included.