SPM3X PROKEY - Case for Arturia Keystep and Behringer Desktop Synthesizer

3D-printed Synthesizer Case for the Arturia Keystep Keyboard with Behringer Synthesizers in Eurorack Format (Pro-800, Cat, K2, Model D, Neutron, Pro-1, and WASP Deluxe).
This affordable case impresses with excellent print quality and significantly enhances the already fantastic small desktop synthesizers. It is versatile and can be used as a Eurorack with the empty cases of the aforementioned synthesizers.

The case comes standard with one synthesizer mount. However, it can be expanded with additional mounts. Note that Behringer devices have two different widths, and the mount should be chosen according to the width (424 mm or 374 mm).

Pro-800 (424 mm wide) • Cat (374 mm wide) • K2 (424 mm wide) • Model D (374 mm wide) • Neutron (424 mm wide) • Pro-1 (424 mm wide) • WASP Deluxe (374 mm wide) • Spring Reverberation 636 (374 mm wide)

The base case remains the same and can be expanded with either mount type.

Currently, we recommend installing no more than three devices in one case. More devices can be installed, but in this case, the case should be leaned against a wall or other solid object at the back to prevent possible tipping and to relieve the supports.

YouTube Video 1: Assembling the case after 3D printing
https://youtu.be/u27RUTCh2mQ

YouTube Video 2: Installing the synthesizers in the case
https://youtu.be/cHH9hNwjyrI?si=MdYHO6eIZ_T08jL7

Scope of Delivery
The case consists of a base plate, 2 side parts, and 2 synthesizer mounts, which are attached to the base plate with hinges. Silicone feet on the bottom ensure a secure stand on the table. The desired synthesizer tilt angle can be locked at the back with two stands.

Quality
Only high-quality NX 2 PLA from the Austrian company extrudr is used as the printing material. Printing all parts of the base case takes approximately 36 hours.
All screws for fastening in plastic are made with ruthex melt inserts. Therefore, the base case alone has 16 melt inserts.

Tools
The base case with one synthesizer mount comes unassembled. The following tools are required for assembly:
• 2.5 mm Allen key
• 3 mm Allen key
• Phillips screwdriver

The synthesizers and the keyboard shown in the photos are not part of this offer. Some photos show the SPM Pro Case with the extension for a second synthesizer, which can be purchased separately.