OPTon - 3D-Printed Case for the Teenage Engineering Tonic Pocket Operator

To insert the Pocket Operator into the case, the PO hanger must be completely removed. Any remaining residue should be carefully sanded off to ensure the top of the Pocket Operator is smooth and straight. Never force the Pocket Operator into the case!

Alternative for PO Hanger

If you prefer not to remove the hanger from the Pocket Operator, you can find cases in our shop with an opening on the back to accommodate the hanger.

Instructions

A video guide for inserting the buttons and the Pocket Operator is available on my YouTube channel. The process is the same for almost all spillerphoto 3D cases.

Standard Configuration

• 16 sequencer buttons: blue translucent PLA filament
• 6 side buttons: green - hard (PLA filament)
• 1 play button: green - hard (PLA filament)
• Case color: gray metallic

The Set Includes

• Upper part of the case
• Lower part of the case with an opening for battery access
• 4 screws
• 23 buttons
• 4 silicone feet
• 2 encoder caps

Please Note: The Pocket Operator shown in the photos is not included.

Upgrade and protect your Teenage Engineering Tonic Pocket Operator with our premium 3D-printed case. Visit our shop for more customization options!