Monolith DUO - 3D printed case for 2 TE Pocket Operators

3D-Printed Case for 2 Teenage Engineering Pocket Operators

The top of the case is printed with high-quality PETG, while the bottom is printed with PLA. The bottom part uses matte black PLA for higher strength, and the top part uses slightly softer, UV-resistant PETG filament.

The case kit includes a connector for linking and synchronizing the Pocket Operators within the case.

Note

To insert the Pocket Operators into the case, the PO hangers must be completely removed. Any residues may need to be carefully sanded down to ensure the top of the Pocket Operators is smooth and flat. Do not force the Pocket Operators into the case!

Instructions

A video tutorial for inserting the buttons and the Pocket Operators is available on my YouTube channel. The process is similar for most spillerphoto 3D cases. For the Monolith DUO, connect the two Pocket Operators with the sync connector before inserting them. Then, carefully slide the two POs into the case from the front. Ensure that the previously inserted 3D-printed buttons do not pop out during insertion. Close the lid, screw it in place, and attach the encoder caps.

Various color combinations for the case and buttons are possible. Please inquire accordingly!

Included in the Kit:

• Top part of the case
• Bottom part of the case
• 4 screws
• 40 buttons
• 4 silicone feet
• 4 encoder caps
• 1 sync connector

The Pocket Operators shown in the photos are not included.