JUPO-8 - 3D printed case for the Teenage Engineering Pocket Operator

A 3D printed case for the Teenage Engineering Pocket Operator in a classic vintage synthesizer design.

An acrylic glass pane is incorporated into the LCD opening on the top. This provides additional protection for the Pocket Operator's display.

Note
To insert the pocket operator into the housing, the PO hanger must be completely removed. Residue may need to be carefully sanded off to ensure the top of the Pocket Operator is smooth and straight. Never force the Pocket Operator into the case!

If you don't want to remove the Pocket Operator's hanger, you can also find cases in the shop where the Pocket Operator's pendant can be passed through an opening on the back of the case.

Instructions
You can find video instructions for using the keys and the Pocket Operator in my YouTube channel. The procedure is identical for almost all spillerphoto 3D cases.

Scope of delivery of the Jupo-8 housing:
- Upper part of the case
- Lower part of case with opening for battery access
- 4 screws
- 23 keys
- 4 silicone feet
- 2 encoder caps

The pocket operator shown is not part of this offer.