DSQ-1 PLUS with 18 button upgrade - Korg SQ-1 Eurorack mounting frame
€ 34.95 *
Delivery time (DE): Within 6-7 business days
Item number: P417263
DSQ-1 PLUS with 18 button upgrade - Korg SQ-1 Eurorack mounting frame
The DSQ-1+ is a 3D-printed Eurorack mounting frame for the Korg SQ-1 sequencer. While the DSQ-1 mounting frame offers larger lettering, the DSQ-1+ uses this area to make room for a 4HP Eurorack module.
The new knobs are larger than the original knobs. Due to their size and improved profile, they offer better handling than the small original knobs. The center of the knobs is hollow (colored knobs), allowing the red light of the step sequencer to shine through. The transparent buttons are completely enclosed and have no hole in the middle.
To install the mounting frame, the back of the original SQ-1 sequencer housing must be removed.
Simple assembly
- Remove the batteries
- Remove the thin plastic film on one side that holds the battery holder in place
- Loosen the 4 front screws
- Remove the back and pull the battery holder through the back so that the back can be set aside
- Slide the SQ-1 into the mounting frame
- Fix the mounting frame with the 4 screws from the front
The SQ-1 can be powered either via batteries or via USB with an angled USB cable.
Scope of delivery
1 pc. 3D printed PLA mounting frame + 1 blind panel.
18 3D printed buttons
The pictured Korg SQ-1 sequencer as well as screws, nuts and battery holder are not part of the offer.
The DSQ-1+ is a 3D-printed Eurorack mounting frame for the Korg SQ-1 sequencer. While the DSQ-1 mounting frame offers larger lettering, the DSQ-1+ uses this area to make room for a 4HP Eurorack module.
The new knobs are larger than the original knobs. Due to their size and improved profile, they offer better handling than the small original knobs. The center of the knobs is hollow (colored knobs), allowing the red light of the step sequencer to shine through. The transparent buttons are completely enclosed and have no hole in the middle.
To install the mounting frame, the back of the original SQ-1 sequencer housing must be removed.
Simple assembly
- Remove the batteries
- Remove the thin plastic film on one side that holds the battery holder in place
- Loosen the 4 front screws
- Remove the back and pull the battery holder through the back so that the back can be set aside
- Slide the SQ-1 into the mounting frame
- Fix the mounting frame with the 4 screws from the front
The SQ-1 can be powered either via batteries or via USB with an angled USB cable.
Scope of delivery
1 pc. 3D printed PLA mounting frame + 1 blind panel.
18 3D printed buttons
The pictured Korg SQ-1 sequencer as well as screws, nuts and battery holder are not part of the offer.
*Incl. VAT and plus shipping costs.