3D printed cases for the TE Pocket Operators
/cases-for-the-te-pocket-operators.jpeg)
3D printed Case for TE Pocket Operators
After a lot of wasted trial prints and an almost finished design which went into the waste bin, I finally finished the case with 4 new designs for the TE Pocket Operators. 3D printed cases for TE Pocket Operators in vintage synth design for the Teenage Engineering Pocket Operator is printed with high quality Prusament PLA, Filamentum PLA and or FilaFlex40. The case and button colours are fully configurable.
The ready 3D printed case includes:
- Top part of the enclosure
- Bottom part of the enclosure
- 4 screws
- 23 buttons
- 4 silicon feet
Update 01.12.2020:
- 2 encoder caps
.png)
.png)
.jpeg)
.jpeg)
.jpeg)
.jpeg)
.jpeg)
.jpeg)
.jpeg)
.png)
.png)
.png)
.jpeg)
.jpeg)
-
PO DMX - 3D gedrucktes Gehäuse für Teenage Engineering Pocket Operator€ 22,95 -
PO 303 - 3D gedrucktes Gehäuse für den Teenage Engineering Pocket Operator€ 22,95 -
PO33-LET - 3D gedrucktes Gehäuse für den Teenage Engineering Pocket Operator€ 24,95 -
MPO66 - 3D gedrucktes Gehäuse für den Teenage Engineering Pocket Operator€ 22,95
