CAPS are 3D printed PLA stands for Behringer Model D and Behringer Neutron
/a-stand-for-behringer-synthesizer.jpeg)
The DCAPS are now available for 3D printing under Creative Commons license on Thingiverse: https://www.thingiverse.com/thing:3074228
Features
- 2 x 11.4 HP (58.5mm) additional space for Eurorack modules
- DCAPS with 65 mm maximum module installation depth
- Each DCAP with whole for external wiring
- Wholes for mounting on other modular systems
- Lifts the Behringer metal case over the cable connections of the Keystep.
The idea
After taking the Behringer Model D and Arturia Keystep out of its original metal case into the new DCASE housing, the two original metal cases became abandoned. Since the cases are quite solid, the idea was born to modify them for a better user experience and integration. The DCAPS where born.
.png)
.png)
.png)
.jpeg)
.jpeg)
.jpeg)
.png)
The Installation
The DCAPS are easy to install and the installation process is straight forward. Only a Phillips screwdriver is required for the assembly. Just remove the 4 screws on each side wall of the original metal housing and replace the fake wood side walls with the DCAPS. The metal plate as well as the screws of the original Behringer housing are re-used for mounting the DCAPS.
stl file for 3D printing is published under Creative Commons license on Thingiverse: https://www.thingiverse.com/thing:3074228